How To Fix A Lightning Connector With Liquid Detected In Seconds

Lightning Connector, Newer iPhones have the luxury of being waterproof

Water pressure in shallow waters can be absorbed by them, allowing them to accompany the user during brief swims in pools and shallow bodies of water. 

In spite of this, it is not without its drawbacks.

For a short period of time, you will not be able to charge your phone when you enter water.

As a safety feature, iPhones automatically turn off power to their ports when they become wet. Patting the port area dry will expedite the drying process so you can plug your phone in faster. If absolutely necessary, you can use a wireless charger during this time, or you can use the manual override.

If the iPhone detects that it has been submerged in water, it will turn off all functions connected to the lightning port. 

You can’t use USB tethering, data transfers, and most importantly, you can’t charge your phone until it’s dry. 

To ensure that your charging port is free of water as soon as possible, there are some easy steps you can take.

You Need To Fix Your Damp Lightning Port As Soon As Possible

If your phone has a wet lightning port warning, don’t insert any cords into it.

The iPhone will not allow actual current to flow by default.

There is, however, an emergency override that is not recommended.

Your phone may be permanently damaged if you do this.

Force And Gravity

Give the iPhone a few taps on the top with your hand while holding it with the lightning port facing down.

If there is any large amount of water trapped inside, this will dislodge it. 

Because you are removing excess liquid, your lightning port will dry much faster.

Air Drying

Put your phone in a window seal or another area that is breezy.

You will be able to speed up the drying process of your phone.

Play The Waiting Game

A wet lightning port can take more than 30 minutes to dry if you don’t take action.

It is possible to reduce the duration of your phone’s wetness by following both of the above steps. 

Before charging, you must wait for the warning to disappear.

Wireless charging is still possible, however. 

Wireless Charging

Make sure you charge your phone before your lightning port dries out.

A wireless charging station requires only that you place your phone on it. 

If you’re fresh out of the pool with your iPhone, you’ll be able to charge it wirelessly. 

Always bring a wireless charger with you when going to the pool to prevent your phone from dying.

When your phone is wet, it is the perfect time to charge it.

Wait until the phone is dry before setting it down on the charging pad. 

While your phone actively dries out, you’ll be able to charge it to full capacity.

Don’t Do These Things

It is possible to dry your iPhone faster if you do a few things, but there are also a few things to avoid if you don’t want your iPhone to get wet. 

Compressed air cans should not be used. 

Liquid expectorants are used in compressed air. 

It’s possible for liquid to shoot out of a compressed air can and cause even more problems. 

Any electronics should not be used with compressed air cans due to the possibility of water damage. 

Cotton swabs should not be used to dry out your phone. 

Your port may become clogged with fiber, preventing a cable from being fully inserted.

The pins inside the port could also be permanently damaged. 

Rice is another bad idea. 

Water won’t damage your iPhone, since it’s water-resistant. 

The port on your phone could be damaged by rice particles. 

You should just wait until it dries. 

Dry it out without using a hair dryer or other hot air device. 

The components of a phone are delicate and highly sensitive to heat. 

Using too much direct head could bend and warp the sensitive metals inside the phone, undo a soldering point, or melt plastic components.

Emergency Override

Even when wet, you might want to charge your phone. 

An emergency override is available on the iPhone. 

After the warning appears, insert the cable again and hit emergency override. 

You will be able to charge your phone even when it might be detrimental to it. 

If you need your phone charged in an emergency, you should only use this feature. 

A Only in medical emergencies, in the event of being lost and having to use GPS, or in other circumstances should you use the emergency override. 

It is possible to permanently damage your phone by allowing electricity to enter it while it is wet. 

What If My Phone’s Not Wet?

In When the user’s phone is dry, the wet port warning may still appear. 

Accessories usually malfunction in this situation. 

Your iPhone’s dampness detection may be being confused by a missing pin on your lightning cable. 

You should be able to fix the problem by using a different charging cable. 

It is also possible that the phone has an obstruction that prevents the lightning charger from connecting properly.

Examine the port with a flashlight and carefully remove any debris with a paperclip or sim card tool. 

You should be very careful not to damage the pins inside the port. 

One of the pins could be permanently damaged by even the slightest touch. 

To remove debris, you can also use an air compressor. 

Spray the air into the lightning port by setting the air compressor to a relatively low PSI.

It’s important to distinguish compressed air in a can from compressed air from an air compressor. Unlike liquid expectorants, air compressors do not use liquids to push air out, making them safer for electronic devices.

Even some handheld vacuum cleaners come with a blower. 

Electronics can also be cleaned with these. 

Articles: 33

Leave a Reply

Your email address will not be published. Required fields are marked *